News 2009
-Product News-
2009-12-11 - MPM-U300 & Accessories

MPM-U300 is a fan-less 300W, AC/DC switching power supply, efficiency up to 91%. It is 1 U frame and widely adjustable input voltage. Even two units in parallel mode, the earth leakage current is less than 300uA at 264Vac 63Hz normal condition, total maximum power is rated 300W, peak 360W max. 5 seconds with convection cooled; max. 360W continuously with minimum 23.3CFM forced air cooling at 50° environment temperature. It have been approved with the newest medical safety approvals; CB IEC 60601-1 3rd Edition, TUV EN60601-1 3rd Edition. These below MPM-U300 accessories can integrate your system and provide you various choices.



2009-10-22 - MPD-F113-1

The MPD-F113-1 is a 110W single output DC/DC converter. It is a compact size 2 x 5" and wide input range from 9-32VDC. Fully isolated primary to secondary avoid disturbed noise to affect secondary side. The low input inrush current is 3A max. for preventing turn on issue and protecting the power supply.


Please be informed the press release is for reference only, please contact us for  newest version.  Please feel free to contact us if not expecting to receive our press release in the future. Should you have any question or comment, please don’t hesitate to contact our sales representatives or sales@mgpower.com
2009-9-8 - MPI-H20D

200W industrial switching power supply, triple outputs.
Low leakage current designation meets medical regulations with maximum 300uA for earth leakage current at 264Vac, 63Hz normal condition which complies to the requirements of gaming and gambling applications.


Please feel free to contact us if not expecting to receive our press release in the future.
Should you have any question or comment, please don’t hesitate to contact our sales representatives or sales@mgpower.com
2009-6-3 - MPM-U300 series

Please feel free to contact us if not expecting to receive our press release in the future.
Should you have any question or comment, please don’t hesitate to contact our sales representatives or sales@mgpower.com

2009-3-17 - MPM-X12y series is now UL, cUL 60601-1 and CCC approved

With the compact size of MPM-X12y as a single output medical adapter, all our customers eager to introduce it with the applications to the international market.
Other than IEC/EN 60601-1 (second edition) approved already, it is our honor to anounce that our MPM-X12y is now UL, cUL (UL 60601-1), ITE CB (IEC 60950-1), and CCC (GB 4943) approved. In addition, we are currently applying Japan PSE approval (JP 60950-1) which is estimated to be completed in the end of April.
Please feel free to contact us for more details.

2009-3-17 - MPE-008A is now CCC approved

As the compact size of MPE-008A with 2" x 5" footprint, our customers eager to introduce it with the applications to the Mainland China market.
It is our honor to anounce that our MPE-008A is now CCC approved.
Please feel free to contact us for more details.

-Corporation News-
2009-7-29 - Warranty Policy and RMA Service

Warranty Policy & RMA Service

Magic Power Technology Co., Ltd. prides ourselves with high quality products and will stand behind any dissatisfaction among our customers.

1. Validity and effectiveness

  • ‧Warranty terms apply only to merchandise shipped from Magic Power Technology Co., Ltd. referring to invoice date.
  • ‧All medical products (MPM, approved with IEC/EN/UL 60601-1 regulations) shipped from Magic Power Technology Co., Ltd. since week 28, July of 2009; provide warranty up to 3 years and others would be up to 2 years.

 

2. Exclusive and warranty range

  • ‧Any physical damage, including the dc fan(s), will avoid any warranty terms.
  • ‧The use of the unit outside of the specified range will avoid any warranty terms.
  • ‧External impacts as flash over, dielectric strength high voltage (Hi-pot) etc will avoid any warranty terms.
  • ‧Magic Power Technology Co., Ltd warrants to the original purchaser only.
  • ‧Magic Power Technology Co., Ltd. will not be responsible for any lost packages and or accessories during shipping.
  • ‧For out of warranty products, Magic Power Technology Co., Ltd. will provide an estimated repair cost before any work is started.
  • ‧Lost serial number products would be arranged as out of warranty.
  • ‧If RMA unit is found with no failure, product(s) will be returned freight collect with necessary return shipping cost and investigation cost.
  • ‧If a unit is found to be beyond economical repair or damaged for improper use of users, you will be notified by your customer service representative and further options can be discussed at that time.

 

3. Conditions and delivery

  • ‧In-warranty products will be repaired, or replaced at Magic Power Technology's expense and decision.
  • ‧In-warranty products could be returned back to Magic Power Technology Co., Ltd. for repairing with authorized RMA number in the most economy way based on the actual situation. Return shipping cost would be each trip covered by the original purchaser and Magic Power Technology Co., Ltd.


4. Return Material Authorization (RMA) process
In order to ensure the fastest and most accurate processing of your product repair, please contact your local Magic Power Technology Customer Service Representative for an RMA number before returning your product for repair. Products returned to us without a RMA number will not be accepted under any circumstances.

  • ‧Please offer failure description to your customer service representative.
  • ‧For warranty verification purposes, please confirm that the serial number of the unit being returned is indicated.
  • ‧You will be contacted with an RMA number and return instructions after receiving both failure description and serial number.
  • ‧All request serial numbers must match with the original invoice.
  • ‧Please clearly reference the RMA number on the outside of the shipping container, with any additional documentation that you may wish to include, inside the box. Item without RMA number will not be accepted. All returns, whether for credit or warranty repair/replacement must have a RMA number.

* NOTE: The WARRANTY and Service Program is subject to change or modifications without notice.

2009-6-3 - MPM product warranty extend up to 3 years

Magic Power would like to announce the policy update for the warranty of all our medical MPM products.
All MPM medical products produced since July 2009, with date code 0928 and after, would have warranty up to 3 years.
For more detailed information, please refer to our warranty policy.

Address: 9F-6, No. 268, Lien Chen Rd., Zhonghe Dist., New Taipei City 23553, Taiwan R.O.C.    | TEL: 886-2-8227-8688 | FAX: 886-2-8227-8690
BEST VIEWED WITH IE9 / 1280x768